- Project Cooperation
The Vandy Vape Bonza comes packaged in a blue box with a silver cover. On the front of the cover, you will see a color indication of your atomizer, some Vandy Vape branding, and some Bonza branding. On the sides of the box there is some Vandy Vape branding as well. Turn the box over and you will see some more obligatory Vandy Vape branding as well as the company's location and phone number printed on the box.
In order to access the RDA, you slide the box open and your atomizer is revealed. Once the box is open, the atomizer and the spare drip tips are on the first level and the spare parts bag is on the second level, beneath the foam insert.
The Bonza comes fully assembled with a resin wide bore drip tip installed. There are also two spare drip tips included. One is a wide bore, shorty style, ultem, drip tip. The other is a wide bore, Delrin, drip tip that is slightly taller than the Ultem drip tip. The resin drip tip measures 18 mm wide and 7.4 mm tall. The Ultem drip tip is 17.5 mm wide and the Delrin drip tip is 16 mm wide. There is also a 510 drip tip adapter included so you are able to run all of your traditional 510 drip tips.
The top of the top cap is flat and it has a Goon or 810 opening. There is a design around the rim of the top cap with some ribbing milled into it. Right below that we have an o’ring that holds the top cap onto the sleeve. Below the o’ring there are three airflow cut outs, that serve as your AFC. Because there are 3 airflow cutouts, this RDA is suitable to run in dual or single coil mode. On the interior of the top cap we do have a conical design towards the top.
The sleeve of the RDA is held onto the base by 2 o’rings. On both sides of the sleeve there are 15 side airflow slots, arranged in three rows of five. The slots coincide with the cutouts on the top cap. You can adjust your airflow, 3 air holes at a time. In between the airflow slots there is a skull and crossbones etched into the sleeve on one side.
The deck on the Bonza is 24 karat gold plated and the deck screws are accessed from the top of the posts. All of the screws are flat head grub screws that are nice and beefy. There are two post holes on the outer part of the deck and the inner part of the deck uses an upside down clamp system. The juice well is very deep. So deep that it will hold 2 mls of juice. This makes it ideal as a squonking atomizer.
On the exterior of the base there are two rings that hold the sleeve into place. They have a very nice tolerance to them. The bottom of the base is 24 karat gold plated and it has a lip that does protrude out from the sleeve to give it a little bit of a two toned look. On the bottom of the base there is some Vandy Vape branding as well as a Phillips head negative post screw.
On the top of the bottom of the base there is some Bonza branding and a serial number. The 510 pin is fully removable and replaceable with the included squonk pin. It is a flat head 510 pin that is gold plated with an insulator ring around it. The threading around the 510 pin is gold plated as well. The included squonking pin is gold plated and it is installed with the included hex key. The base measures in at 24 mm. The overall size of the Bonza RDA when fully assembled is 24 mm by 25.5 mm.