When you purchase the Revolver RTA you will receive two drip tips. The pre-installed drip tip is a frosted chuff style drip tip with some ribbing around the outer part of it. The secondary drip tip is a little taller but also 18 mm wide. It is black and both drip tips are Goon style drip tips. There is also a 510 drip tip adapter for those of you that still like to run your traditional 510 drip tips
The Revolver RTA has a traditional top fill cap. The threading on the top fill cap is extremely smooth and it does screw off rather easily. There is some knurling around the edges of the top cap. On the interior of the top cap, there is a Goon style o-ring that will accommodate all of your aftermarket Goon style drip tips. There is a slightly raised platform in the middle. With the top cap removed you will notice an o’ring on the inside and some very smooth threading as well.
The top of fill port cap has two kidney bean shaped fill ports that will accommodate every type of bottle in existence. The threading on the top of the chimney is very smooth. The chimney is short with a medium bore. The chimney leads into an extremely conical barrel that guarantees great flavor.
Your revolver RTA has a few different types of capacity configurations. If you run it with the straight glass and the 2 ml spacer inside it will be TPD compliant with a 2 ml capacity. Take the spacer out and the straight class will get you 3 mls of capacity. If you remove the straight glass and install the bulb glass extension you will get 5 mls of liquid capacity. The glass sections are held in place by two thick o’rings on either side of the atomizer.
The deck of the Revolver is extremely innovative. It has three different types of air flows. The user is able to adjust these are flows via a flat head screw on the bottom interior of the deck. For this deck, we designed a 120-degree revolving internal airflow. The user has the choice between dual, triple, or honeycomb internal air tubes.
As innovative as that sounds, that is not where the innovation ends with the Revolver RTA. We have developed a deck that is extremely simple to build on. It is a T clamp style deck with one screw that can use either Phillips head or flat head screwdrivers. This deck was designed exclusively for single coil lovers. Once your coil is in place and secured, wicking is as easy as putting your wicking material in the wicking ports.
The exterior of the barrel has some Vandy Vape branding on one side and some Revolver branding on the other. The barrel extends upwards into a short chimney. The interior of the barrel has a beautiful conical design that makes sure the flavor is on point. Threading on the barrel is extremely smooth and the barrel threads beautifully into the base of the deck.
On the exterior of the base, there is some knurling as well as dual bottom airflow slots. The base measures 25 mm in diameter but with the bulb glass installed, the middle measures 28 mm in diameter. Both air flow slots are fully adjustable with stoppers on both ends. The AFC is very smooth and has a nice range to it. This tank can go from a restricted DL vape to an airy DL vape by simply adjusting the smooth AFC.
On the bottom of the base, you will find some Vandy Vape branding with some Revolver branding. The 510 connection is gold plated. There is an insulator ring around the gold-plated 510 for safety. Stainless steel threading around the 510 is machined well and it is very smooth. There is also a serial number on the bottom of the base.