The Vandy Vape Maze BF RDA comes with a beautiful resin drip tip. The drip tip is a Goon or 810 style drip tip that has a wide bore. There is also a 510 drip tip adapter included for those vapers that like to run their traditional 510 drip tips.
The top cap has a Goon or 810 style drip tip opening with a thick o’ring on the interior. This allows the top cap to keep your drip tip in place. Around the circumference of the exterior of the top cap there is some knurling. This knurling allows you to get a good grip of the top cap when adjusting the airflow. Right below the knurling on the interior of the top there is an o’ring with a really nice tolerance to it. The interior of the top cap has 5 air flow cut outs that coincide with 5 square shaped cutouts on the barrel, with 9 individual holes per square. The interior of the top cap is conically designed for flavor.
The barrel has 5 squares and each of the 5 squares has 9 individual holes that can be closed down 3 at a time. The individual holes are slotted downward so they hit the top of the installed coil. This type of design creates a very smooth airflow. There is also some Maze branding on the exterior of the barrel.
In your packaging you will receive two .2 ohm coils. The coils are horizontal and flat giving them a disc like appearance. Inside the coil there is a 100% Japanese cotton wicking material. Some vapers refer this type of coil as a flat Notch coil or a Stove Top coil. The material used on the coil is SS 316L. This coil has a rating of 50 - 100 watts, with a best rating of 70 - 80 watts.
The coil is installed by screwing it onto a post that is mounted on the bottom of the juice well. There are two posts for this RDA. One is specifically for squonking and the other is a non squonking post. This RDA also comes with a separate squonking pin as well as a traditional 510 pin.
The squonking post for this RDA is shorter than the traditional post. The juice hole for refilling is towards the top of it. The non squonking post that is included in this RDA is a little bit longer than the squonking one and it has the juice fill hole positioned a little lower.
Both posts are mounted on the bottom of the juice well. The juice well for the Maze BF RDA holds 2 mls of juice. If you are running the non squonking post then you can fill this RDA from the top. If you are running the squonking post, all you have to do is squeeze your bottle and fill up the juice well.
On the exterior of the base there are two o’rings that hold the barrel in place. The o’rings have a very nice tolerance. On the bottom of the base there is some Maze branding as well as a serial number. The diameter of the base is 24 mm.
The 510 connection for The Maze BF RDA is gold plated, no matter which one you decide to use. There are two different 510’s that you can use in this RDA. One is a traditional 510 and the other is a squonking 510. This tank is easily converted over, no matter which way you decide to run it. There is also an included hex key for when you want to install your squonking 510. Threading around the 510 is stainless steel and buttery smooth. There is also an insulator ring installed around your 510 for safety.